4 / 4
А.М. Власов, В.А. Полетаев
4
The study of temperature change in the working gap
of magnetic-liquid sealers using ANSYS program
© A.M. Vlasov, V.A. Poletaev
Ivanovo Power Engineering University, Ivanovo, 153003, Russia
During operation of magnetic fluid sealant as a result of heating magnetic properties of
fluid may deteriorate and flow can occur under the pole teeth. To study the effect of tem-
perature on change of the friction torque in the working gap of magnetic-liquid sealer an
installation has been designed and constructed. Using the ANSYS, a thermal analysis was
made, allowing to analyze the processes that occur in magnetic-liquid seal at its opera-
tion, as well as to optimize its design.
Keywords:
magnetic-liquid sealer, temperature conditions, thermal conductivity, working
gap, friction torque.
REFERENCES
[1]
Vlasov A.M., Poletaev V.A. Issledovaniye vliyaniya temperatury na
izmeneniye momentov treniya v rabochem zazore magnitozhidkostnykh
ustroystv [Investigation of the effect of temperature on change of the friction
torques in the working gap of magnetic-liquid devices]. In:
Sostoyaniye i
perspektivy razvitiya elektro- i teplotekhnologii. Materialy Mezhdunarodnoi
nauchno-tekhnicheskoy konferentsii (XVIII Bernardovskie chteniya)
[State and
prospects of development of electrical and heat technologies. Materials of the
International scientific conference (XVIII Bernard Readings)]. Ivanovo, 2015,
pp. 319–322.
[2]
Vlasov A.M., Poletaev V.A. Raschet momentov treniya v magnitozhidkostnykh
ustroystvakh pri gidrodinamicheskoy (zhidkostnoy) smazke [Calculation of the
friction torques in the magnetic-liquid devices with hydrodynamic (liquid)
lubricant]. In:
Sostoyaniye i perspektivy razvitiya elektro- i teplotekhnologii.
Materialy Mezhdunarodnoi nauchno-tekhnicheskoy konferentsii (XVIII
Bernardovskie chteniya)
[State and prospects of development of electrical and
heat technologies. Materials of the International scientific conference (XVIII
Bernard Readings)]. Ivanovo, 2015, pp. 288–290.
[3]
Vlasov A.M., Golyas A.A., Poletaev V.A. Primeneniye programmy ANSYS
dlya teplovogo analiza magnitozhidkostnogo germetizatora [Application of
ANSYS software for the thermal analysis of magnetic-liquid sealer]. In:
Sostoyaniye i perspektivy razvitiya elektro- i teplotekhnologii. Materialy
Mezhdunarodnoi nauchno-tekhnicheskoy konferentsii (XVIII Bernardovskie
chteniya)
[State and prospects of development of electrical and heat
technologies. Materials of the International scientific conference (XVIII
Bernard Readings)]. Ivanovo, 2015, pp. 337–341.
Vlasov A.M.,
post-graduate student of the Department of Mechanical Engineering Tech-
nologies at Ivanovo Power Engineering University. e-mail:
leshka.vlasov@gmail.comPoletaev V.A.,
Dr. Sci. (Eng.), professor of the Department of Mechanical Engineering
Technologies at Ivanovo Power Engineering University.