Analysis of stiffness of elastic couplings with packages of cylindrical spring sleeves
Authors: Buketkin B.V., Zyablikov V.M., Shirshov A.A.
Published in issue: #4(124)/2022
DOI: 10.18698/2308-6033-2022-4-2168
Category: Mechanics | Chapter: Mechanics of Deformable Solid Body
The drives of various machine units that transmit energy from one part of the machine to another use couplings as connecting elements, with permanent couplings, including elastic compensating ones with metal elements, being mostly used. The metal elastic elements in the latter may be in the form of packages of spring sleeves. Their important characteristic is torsional stiffness. The paper analyses the influence of the main dimensions of spring sleeves on the torsional rigidity of the coupling. The study was carried out numerically by the finite element method using the ANSYS R17.0 Academic software package on the coupling model in which the spring sleeve package is replaced by one sleeve with a thickness equal to the thickness of the sleeve package. The analysis provides a rationale for the calculation model, using which the analytical dependence of the torsional stiffness of the coupling on its main dimensions was obtained - the position of the center of the package relative to the half-couplings, the dimensions of the package. Analysis of the analytical dependence made it possible to obtain fairly simple relationships that are convenient for calculating the torsional stiffness of the coupling.
References
[1] Ryakhovskiy O.A. Ivanov S.S. Spravochnik po muftam [Copulings reference book]. Leningrad, Politekhnika Publ., 1991, 384 p.
[2] Liu X., Zang Y., Gao Z., Zeng L. Time delay effect on regenerative chatter in tandem rolling mills. Shock and Vibration, 2016, Article ID 4025650. https://doi.org/10.1155/2016/4025650
[3] Yamano I., Takemura K., Endo K., Maeno T. Method for controlling master-slave robots using switching and elastic elements. In: Proceedings 2002 IEEE International Conference on Robotics and Automation. Cat. No. 02CH37292, IEEE, 2002, vol. 2, pp. 1717–1722.
[4] Dežman M., Babič J., Gams A. Qualitative assessment of a clutch-actuated ankle exoskeleton. International Conference on Robotics in Alpe-Adria Danube Region. Springer, Cham, 2017, pp. 778–786.
[5] Stroe I. Simple mechanical clutch with multiple functions. Tez. SYROM, 2009. Springer, Dordrecht, 2010, pp. 433–443.
[6] Deshbhratar V.J., Kakde N.U. Design and structural analysis of single plate friction clutch. International journal of engineering research and technology, 2013, vol. 2, no. 10, pp. 3726–3732.
[7] Andrzej K. Investigation of damping of vibrations in a system with two-disc inseparable clutch. PAMM: Proceedings in Applied Mathematics and Mechanics. Berlin, WILEY–VCH Verlag, 2004, vol. 4, no. 1, pp. 97, 98.
[8] Stroe I. Elastic and safety clutch with metallic roles and elastic rubber elements. New Trends in Mechanism Science. Springer, Dordrecht, 2010, pp. 285–292.
[9] Stroe I. Elastic and safety clutch with radial tapered roller and metallic elastic elements axially arranged. Annals of the Oradea University, Fascicle of Management and Technological Engineering, 2014, vol. 13, pp. 139–142.
[10] Zyablikov V.M., Shirshov A.A. Spravochnik. Inzhenerny zhurnal s prilozheniem — HANDBOOK. An Engineering journal with appendix, 2014, no. 8, pp. 26–30. DOI: 0.14489/hb.2014.08.pp.026-030
[11] Zyablikov V.M., Shirshov A.A. Spravochnik. Inzhenerny zhurnal s prilozheniem — HANDBOOK. An Engineering journal with appendix, 2016, no. 2, pp. 13–19. DOI: 10.14489/hb.2016.02.pp.013-019
[12] Malaschenko V.O., Strіlets O.R., Strіlets V.M., Kotik B.A. Vіsnik Natsіonanogo unіversitetu vodnogo gospodarstva ta prirodokoristuvannya (Bulletin of the National University of Water Management and Environmental Sciences), 2020, no. 2 (90), pp. 71–81.
[13] Zyablikov V.M., Shirshov A.A. Spravochnik. Inzhenerny zhurnal s prilozheniem — HANDBOOK. An Engineering journal with appendix, 2021, no. 11, pp. 30–37. DOI: 10.14489/hb.2021.11.pp.030-037
[14] ANSYS® Academic Research, Release 17.0, Help System, Mechanical ADPl Guide, ANSYS, Inc. ANSYS® Academic Research, Release 17.0, Help System, Mechanical ADPl Guide, ANSYS, Inc.ANSYS I. ANSYS® Academic Research. ANSYS CFX-Solver Modeling Guide, 2013, vol. 15317, pp. 448–451.
[15] Feodosev V.I. Soprotivlenie materialov [Strength of materials]. 14th ed. Moscow, BMSTU Publ., 2007, 590 p.