Расчет тонкопленочного термоэлектрического модуля, изготовляемого методом импульсного лазерного осаждения

5 / 5

Расчет тонкопленочного термоэлектрического модуля…
5
Calculation of the thin-film thermoelectric module
manufactured by pulsed laser deposition
© G.N. Dubrovin, E.S. Gerasimova, A.E. Shupenev
Bauman Moscow State Technical University, Moscow, 105005, Russia
The article presents calculation method of a thin-film thermoelectric module to be manu-
factured by pulsed laser deposition. The module is a polyimide substrate (54×20×0,1 mm),
on which thermoelectric Bi2 Te3-based material is deposited. By the results of calculation
we determined the required number of thermocouples for the module to generate a volt-
age of 3.6 V at a temperature difference of 16 K.
Keywords: thermoelectric module, thin-film thermoelements, pulsed laser deposition.
REFERENCES
[1] Goltsman B.M., Dashevsky Z.M., Kaidanov V.I., Kolomoets N.V. Plenochnyye
termoelementy: fizika i primeneniye [Film thermoelements: Physics and Appli-
cations]. Moscow, Nauka Publ., 1985, 233 p.
[2] Ustroystvo termoelektricheskogo modulya (Element Peltier) [Thermoelectric
cooler (TEC) construction (Peltier cooler)] . Available at: http://
(accessed 30 August 2015).
[3] Rettig F., Moos R. Direct thermoelectric gas sensors: Design aspects and first
gas sensors. Sensors and Actuators B. 2007, vol. 143, no. 1, pp. 413–419.
[4] Marchenko O.V. Metody rascheta termoelektricheskikh generatorov [Methods
for calculating the thermoelectric generators]. Novosibirsk, Nauka Publ., 1995,
199 p.
Dubrovin G.N., a student of Bauman Moscow State Technical University.
e-mail:
Gerasimova E.S., a student of Bauman Moscow State Technical University. e-mail:
Shupenev A.E., an engineer, postgraduate student of Bauman Moscow State Technical
University.