Engineering Journal: Science and InnovationELECTRONIC SCIENCE AND ENGINEERING PUBLICATION
Certificate of Registration Media number Эл #ФС77-53688 of 17 April 2013. ISSN 2308-6033. DOI 10.18698/2308-6033
  • Русский
  • Английский
Article

Feasibility analysis of the installation for the nitrogen liquefaction

Published: 22.04.2016

Authors: Khutsieva S.I., Mitruzaev A.E., Parkin A.N., Brom A.E.

Published in issue: #3(51)/2016

DOI: 10.18698/2308-6033-2016-3-1478

Category: Power, Metallurgic and Chemical Engineering | Chapter: Machines and Devices, Processes of Refrigeration and Cryogenic Engineering, Air Conditioning

The article presents the results of feasibility analysis and calculation of the production cost and cost of using the installation for the nitrogen liquefaction. The particular urgency of solving this problem is associated with both the technical and economic rationale for the optimum heat exchangers (HE) choice to support the overall effectiveness and expediency of their production and operation. For performing the analytical substantiation the dependence of the cost per unit on the electricity cost and the HE cost per unit used in the installation of this type is determined in the article to significantly improve the energy efficiency. For clarity, the article provides the diagram and description of the installation for nitrogen liquefaction, its technical parameters and the potential to increase economic efficiency. Structural diagram of the coil HE shown in the article is supplemented by calculations of the geometric parameters, presented in the tables. In support of commercial efficacy parameters estimated payback period of the installation and profit opportunities are presented. The technique for calculating the commercial factors as payback period, profit etc. is given in the respective tables.


References
[1] Skvortsov Y.V. Organizatsionno-ekonomicheskie voprosy v diplomnom proektirovanii [Organizational and Economic Issues in the Graduation Design]. Moscow, Vysshaya shkola Publ., 2006, 399 р.
[2] Ipatov, M.I., Postnikov V.I. Techniko-ekonomicheskiy analiz mashin i priborov [Feasibility Analysis of Machines and Devices]. Moscow, Mashinostroenie Publ., 1985, 248 p.
[3] Arkharov A.M., Arkharov I.A., Shevich Yu.A. Teplotekhnika [Heat Engineering]. Moscow, BMSTU Publ., 2004, 711 p.
[4] Arkharov A.M. Osnovy kriologii [Fundamentals of Cryology]. Moscow, BMSTU Publ., 2014, 507 p.
[5] Krasnikova O.K. Vitye teploobmennye apparaty kriogennykh i teploenergrticheskikh ustanovok [Coil Heat Exchangers in Cryogenic and Thermal Power Plants]. Moscow, KolosS Publ, 2008, 176 p.
[6] Arkharov A.M., Marfenina I.V. Kriogennye sistemy [Cryogenic Systems]. Moscow, Mashinostroenie Publ., 1996, 576 p.
[7] Sakun I.A., Bambushek E.M., Bukharin N.N., Gerasimov E.D. Teplovye i konstruktivnye raschety kholodilnykh mashin [Thermal and Structural Analysis of Refrigerating Machines]. Leningrad, Mashinostroenie Publ, 1987, 423 p.
[8] Denisov V.I. Techniko-ekonomicheskie raschety v energetike: metody ekonomicheskogo sravneniya variantov [Feasibility Analysis in Power Engineering: Methods of Economic Comparison of Options]. Moscow, Energoatomizdat Publ., 1985, 216 p.