Experimental study of the heat treatment process of thin-film photonic crystal colloidal matrices
Authors: Azarnin I.O., Panfilova E.V.
Published in issue: #7(163)/2025
DOI: 10.18698/2308-6033-2025-7-2463
Category: Metallurgy and Science of Materials | Chapter: Powder Metallurgy and Composite Materials
The paper describes the importance of heat treatment of films in the development of devices based on photonic crystal colloidal matrices. Two main groups of materials are considered – organic and inorganic, their properties and behavior during heat treatment. The behavior of colloidal particles during heating is studied and the change in the optical properties of films is discussed. The effect of various heat treatment modes on the microstructure of materials and their resistance to external factors is also studied. Experimental studies using polystyrene films as an example confirm the effect of heat treatment on the optical properties of materials. The conclusions of the article can be useful for monitoring the physical properties of colloidal films, in a large number of applications related to colloidal lithography, as well as in the development of new, more advanced devices based on photonic crystal colloidal matrices.
EDN FPQJZF
References
[1] Lourtioz J.M., Benisty H., Berger V., Gerard J. M., Maystre D., Tchelnokov A., Pagnoux, D. Photonic crystals. Towards Nanoscale Photonic Devices. Springer Berlin Heidelberg, 2006, 430 p.
[2] Lotito V., Zambelli T. Approaches to self-assembly of colloidal monolayers: A guide for nanotechnologists. Advances in colloid and interface science, 2017, vol. 246, pp. 217–274.
[3] Yablonovitch E. Inhibited spontaneous emission in solid-state physics and electronics. Physical review letters, 1987. vol. 58 (20), p. 2059.
[4] John S. Strong localization of photons in certain disordered dielectric superlattices. Physical review letters, 1987, vol. 58 (23), p. 2486.
[5] Romanov S. G., Maka T., Torres C. S., Müller M., Zentel R., Cassagne D., Manzanarez-Martinez J., Jouanin C. Diffraction of light from thin-film polymethylmethacrylate opaline photonic crystals. Physical Review E, 2001, vol. 63 (5), p. 056603.
[6] Pyatnov M.V., Sokolov M.M., Kiselev I.A., Bikbaev R.G., Pankin P.S., Volko-va I.R. Gunyakov V.A., Volochaev M.N., Ryzhkov I.I., Vetrov S.Ya., Timofeev I.V., Shabanov V.F. Opredelenie pokazateley prelomleniya sloev fotonnogo kristalla iz anodnogo oksida alyumimiya [Determination of the refractive indices of layers of a photonic crystal from anodic oxide aluminum]. Zhurnal tekhnicheskoy fiziki — Journal of Technical Physics, 2024, vol. 94 (2), pp. 278–283.
[7] Arakcheeva E.M., Tanklevskaya E.M., Nesterov S.I., Maksimov M.V., Gurevich S.A., Seekamp J., Torres Sotomayor C.M. Poluchenie fotonnykh kristallov v strukturakh na osnove poluprovodnikov i polimerov s ispolzovaniem metoda nanoimprinta [Preparation of photonic crystals in structures based on semiconductors and polymers using the nanoimprint method]. Zhurnal tekhnicheskoy fiziki — Journal of Technical Physics, 2005, vol. 75 (8), pp. 80–84.
[8] Dolganov P.V., Ksenz G.S., Dolganov V.K. Zhidkokristallicheskie fotonnye kristally: opticheskie svoystva i ikh Zavisimost ot polyarizatsii sveta i temperatury [Liquid crystal photonic crystals: optical properties and their dependence on light polarization and temperature]. Fizika tverdogo tela — Solid State Physics, 2013, vol. 55 (5), pp. 1017–1020.
[9] Ibragimov A.R., Medvedeva O.M., Panfilova E.V., Shramko D.Y. Technology of producing photonic crystal colloidal films by centrifugation. 2024 6th International Youth Conference on Radio Electronics, Electrical and Power Engineering (REEPE), IEEE, 2024, pp. 1–5.
[10] Ibragimov A.R., Maltsev V.S., Min’ko K.R., Hoa C.V., Panfilova E.V. Plasma-chemical etching of colloidal photonic crystal polystyrene films. 2024 6th International Youth Conference on Radio Electronics, Electrical and Power Engineering (REEPE), IEEE, 2024, pp. 1–5.
[11] Azarnin I.O. Tekhnologiya termoobrabotki kolloidnykh plenok polistirola [Technology of heat treatment of colloidal polystyrene films]. All-Russian scientific and technical conference “Student Scientific Spring: Mechanical Engineering Technologies”: Conference materials. Moscow, Bauman Moscow State Technical University, 2024. QuantorForm LLC Available at: studvesna.ru?go=articles&id=4155 (accessed May 17, 2025).
[12] Lotito V., Zambelli T. Heat: A powerful tool for colloidal particle shaping. Advances in Colloid and Interface Science, 2024, p. 103240.
[13] Hsieh C.H., Lin F.T., Lin K.Y.A., Hsieh S.Y., Chen Y.T., Tsai H.P., Yang H. Assembly of nanometer-sized hollow sphere colloidal crystals for applications as tunable photonic materials. ACS Applied Nano Materials, 2022, vol. 5 (10), pp. 15855–15864.
[14] Hoeven J.E.V.D., Shneidman A.V., Nicolas N.J., Aizenberg J. Evaporation-induced self-assembly of metal oxide inverse opals: from synthesis to applications. Accounts of Chemical Research, 2022, vol. 55 (13), pp. 1809–1820.
[15] Lee Y. C., Wu H. K., Peng Y. Z., Chen W. C. The synthesis and assembly mechanism of micro/nano-sized polystyrene spheres and their application in subwavelength structures. Micromachines, 2024, vol. 15 (7), p. 841.
[16] Bellehumeur C.T., Bisaria M.K., Vlachopoulos J. An experimental study and model assessment of polymer sintering. Polymer Engineering & Science, 1999, vol. 36 (17), pp. 2198–2207.
[17] Mikhnev L.V., Bondarenko E.A., Chapura О.М., Skomorokhov A.A., Kravtsov A.A. Influence of annealing temperature on optical properties of the photonic-crystal structures obtained by self-organization of colloidal microspheres of polystyrene and silica. Optical Materials, 2018, vol. 75, pp. 453–458.
[18] Tahami S.V., Pourmahdian S., Hadavand B.S., Azizi Z.S., Tehranchi M.M. Thermal tuning the reversible optical band gap of self-assembled polystyrene photonic crystals. Photonics and Nanostructures-Fundamentals and Applications, 2016, vol. 22, pp. 40–45.
[19] Zhang L., D’Acunzi M., Kappl M., Imhof A., van Blaaderen A., Butt H.J., Graf R., Vollmer D. Tuning the mechanical properties of silica microcapsules. Physical Chemistry Chemical Physics, 2010, vol. 12 (47), pp. 15392–15398.
[20] Herzog G., Kashem M.M.A., Benecke G., Buffet A., Gehrke R., Perlich J., Schwartzkopf M., Körstgens V., Meier R., Niedermeier M. A., Rawolle M., Ruderer M.A., Müller-Buschbaum P., Wurth W., Roth S.V. Influence of nanoparticle surface functionalization on the thermal stability of colloidal polystyrene films. Langmuir, 2012, vol. 28 (21), pp. 8230–8237.
[21] Cooper S., Kamotski I. On photonic band gaps in two-dimensional photonic crystal fibres. Analysis in the vicinity of the low-dielectric light line. 2025. arXiv preprint arXiv:2501.10536. Available at: https://arxiv.org/pdf/2501.10536 (accessed May 17, 2025).
[22] Panfilova E.V., Grishaev N.A. Otrabotka i issledovanie protsessa polucheniya fotonno-kristallicheskikh plenok metodom tsentrifugirovaniya [Development and study of the process of obtaining photonic crystal films by the centrifugation method]. Inzhenerny zhurnal: nauka i innovatsii — Engineering Journal: Science and Innovation, 2021, iss. 4 (112), p. 7. https://doi.org/10.18698/2308-6033-2021-4-2073