Analysis of the methods for calculating heat transfer in regard to the MS-20 brand motor aviation oil under conditions of forced convection in the ring channel given their verification with the experiment
Authors: Altunin V.A., Lvov M.V., Yusupov A.A., Shchigolev A.A., Koreev E.P., Yanovskaya M.L.
Published in issue: #7(139)/2023
DOI: 10.18698/2308-6033-2023-7-2293
Category: Aviation and Rocket-Space Engineering | Chapter: Thermal, Electric Jet Engines, and Power Plants of Aircrafts
Based on experimental studies of the thermal processes in an annular oil channel with the internal heated replaceable metal tube, an experimental database was created. Experimental values of the heat transfer coefficient in regard to the MS-20 aircraft engine oil under its forced convection at various heat flux densities, pressures and pumping rates were calculated based on the experiment results using the Newton — Richmann formula. The authors of the article also created an experimental formula to calculate the Nusselt number. The results obtained were verified by comparing the experimental research results with results of other authors. Theoretical values of the heat transfer coefficient were obtained from the Nusselt number formulas presented by various authors. Formulas and the Nusselt number calculation formulas were analyzed, as well as the heat transfer coefficient in regard to the liquid heat carriers exposed to their forced convection presented by various authors. Graphs and tables compare calculation results according to the theoretical formulas by various authors and calculation results according to the experimental formula of the authors of the article with results of the experimental study. It was established that the experimental formula of the authors of the article was the most accurate and workable. Recommendations are given for calculating the heat transfer coefficient in regard to the MS-20 aircraft engine oil in the annular channel under various thermodynamic conditions. It is proposed to introduce the methodology in conducting an experimental study and creating experimental formulas for calculating the Nusselt number and the heat transfer coefficient in regard to the MS-20 brand aircraft engine oil in studying the other aviation engine oils.
References
[1] Babkin V.I., Aleksashin A.A., Yanovsky L.S., Dunaev S.V., Khurumova A.F. Otechestvennye smazochnye masla dlya aviatsionnykh gazoturbinnykh dvigateley: problemy i perspektivy [Domestic lubricants for aviation gas turbine engines: problems and prospects]. Dvigatel — Engine, 2012, no. 5 (83), pp. 8–11.
[2] Yanovsky L.S., Kharin A.A., Babkin V.I. Osnovy khimmotologii [Fundamentals of Chemotology]. Moscow – Berlin, Direkt-Media Publ., 2016, 482 р.
[3] Trayanov A.E. Konstruktsiya maslyanykh sistem aviatsionnykh dvigateley [Design of aircraft engine oil systems]. Samara, Samara State Aerospace University Publ., 2007, 81 p.
[4] Altunin V.A., Altunin K.V., Aliyev I.N., Shchigolev A.A., Platonov E.N. Razrabotka sposobov uvelicheniya resursa i nadezhnosti sistem smazki dvigateley vnutrennego sgoraniya nazemnogo transporta [Methods for life-extension and increase of reliability of lubrication systems in internal combustion engines used in ground transportation]. Izvestiya vuzov. Mashinostroenie — BMSTU Journal of Mechanical Engineering, 2015, no. 10 (667), pp. 47–57.
[5] Altunin V.A., Altunin K.V., Lvov M.V., Shchigolev A.A., Aliyev I.N., Yanovskaya M.L. Problemy sistem smazki aviatsionnykh dvigateley [Problems of lubrication systems of the aviation engines]. Teplovye protsessy v tekhnike (Thermal Processes in Engineering), 2021, vol. 13, no. 8, pp. 357–384.
[6] Altunin V.A., Lvov M.V., Shchigolev A.A., Yusupov A.A., Yanovskaya M.L. Raschet plotnosti motornogo aviatsionnogo masla marki MS-20 pri razlichnykh temperaturakh i davleniyakh [Calculation of the density of motor aviation MS-20 brand oils at various temperature and pressure]. Inzhenerny zhurnal: nauka i innovatsii — Engineering Journal: Science and Innovation, 2023, iss. 2. https://doi.org/10.18698/2308-6033-2023-2-2252
[7] Konovalova L.S. Raschet termodinamicheskikh protsessov i tsiklov [Calculation of thermodynamic processes and cycles]. Tomsk, Kirov Tomsk Polytechnic Institute Publ., 1985, 94 p.
[8] Mikheev M.A., Mikheeva I.M. Osnovy teploperedachi [Fundamentals of heat transfer]. 2nd ed. Moscow, Energiya Publ., 1977, 343 p.
[9] Karapuzova N.Yu., Fokin V.M. Raschet teploobmennykh apparatov [Calculation of heat exchange devices]. Volgograd, VolgGASU Publ., 2013, 64 p.
[10] Ivanov A.N., Belousov V.N., Smorodin S.N. Teploobmennoe oborudovanie predpriyatiy [Heat-transfer equipment of the enterprises]. St. Petersburg, VShTE SPb GUPTD Publ., 2016, 184 p.
[11] Vinogradov S.N., Tarantsev K.V., Vinogradov O.S. Vybor i raschet teploobmennikov [Selection and calculation of heat exchangers]. Penza, Penza State University Publ., 2002, 111 p.
[12] Bukhmirov V.V., Rakutina D.V., Rodionova M.V., Gasko A.K. Teplovoy i gidravlicheskiy raschet rekuperativnogo teploobmennogo apparata [Thermal and hydraulic calculation of the recuperative heat transfer device]. Ivanovo, ISPU Publ., 2021, 163 p.
[13] Bulygin Yu.A., Baranov S.S. Teploobmennye apparaty v neftegazovoy promushlennosti: kursovoe proektirovanie [Heat exchange devices in the oil and gas industry: course design]. Voronezh, Voronezh State Technical University Publ., 2015, 100 p.